ILX Lightwave LDX-3200 Series User Manual page 60

¨ Front Panel
n Remote
The LASer:DISplay command enables or disables (turns off) the display and some LEDs.
SYNTAX DIAGRAM
:
PARAMETERS An <nrf value> -where 1 = on, 0 = off.
POINTS OF
INTEREST Turning the dis play and LEDs off means that a message of all blank spaces is sent to the
display, and most of the LEDs will be turned off.
EXAMPLES "las:dis 1" -action: turns the display on and enables the LEDs.
"Laser:dis Off" -action: turns the display off and dis ables most the LEDs.
o Front Panel
n Remote
The LASer:DISplay? query returns the value shown on the display.
SYNTAX DIAGRAM
-where the response is character data in quotes.
POINTS OF
INTEREST Returns the actual (6-character) string from the output buffer to the display. If the display is
disabled, it returns "
EXAMPLES "LAS:DIS?" -response: "- 99.9", means the display shows "- 99.9".
"Laser:DISp?" -response: " 0.6", means the display shows " 0.6".
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:
LAS DIS
:
:
LAS
.".
PAGE 15
LASer:DISplay
<white
<nrf
space>
value>
LAS:DISplay?
?
DIS
CHPT 4