ILX Lightwave LDX-3200 Series User Manual page 80

XAMPLES "LAS:LIM:MDP 10" -action: sets the laser output power limit to a value which corresponds to
producing 10.00 mW of PD feedback (optical) power.
"Las:Limit:MDp 5" -action: sets the laser output power limit to a value which corresponds to
producing 5.00 mW of PD feedback (optical) power.
n Front Panel
n Remote
The LASer:LIMit:MDP? query returns the value of the laser monitor PD power limit.
SYNTAX DIAGRAM
:
LAS
-where the response is the LASER power limit setting.
POINTS OF
INTEREST The (LASER) MDP limit is in effect for both laser output current ranges.
The MDP limit is not in effect when CALMD = 0. In this case, the monitor current measurement
is not converted to power.
EXAMPLES "LAS:LIM:MDP?" -response: 3.0, means the monitor PD power limit is set to 3.0 mW.
":LAS:Limit:MDP?" -response: 10.0, means the monitor PD power limit is set to 10.0 mW.
n Front Panel
n Remote
The LASer:LIMit:V command sets the LASER compliance voltage limit value.
SYNTAX DIAGRAM
:
LAS
PARAMETERS An <nrf value> which represents the LASER limit voltage, in volts.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
: :
LIM
: :
LIM
PAGE 35
LASer:LIMit:MDP?
MDP
?
P
LASer:LIMit:V
<white <nrf
V
value>
space>
CHPT 4