ILX Lightwave LDX-3200 Series User Manual page 56

n Front Panel
n Remote
The LASer:CAL:LDV? query is used to determine that the LDX-3200 Series Precision Current Source is ready
for a value to be entered during the calibration cycle of the LASer:CAL:LDV mode.
SYNTAX DIAGRAM
:
POINTS OF
INTEREST After this query is issued and a response of 1 is received, the LDX-3200 Series Precision
Current Source will be ready for the user to enter a voltage value via the LASer:LDV command
(see Chapter 6).
EXAMPLES "LASer:CAL:LDV?" -response: 1, means the LDX-3200 Series Precision Current Source is ready
for the user to enter a voltage value via the LASer:LDV command.
"LASer:Cal:LdV?" -response: 0, means the LDX-3200 Series Precision Current Source is not yet
ready for the user to enter a LASER voltage value.
n Front Panel
n Remote
The LASer:CAL:MDI command is used to enter the LASER photodiode current calibration mode.
SYNTAX DIAGRAM
PARAMETERS None.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:
LAS
:
:
LAS
PAGE 11
LASer:CAL:LDV?
:
CAL
LDV
LASer:CAL:MDI
IPD
:
CAL
MDI
?
CHPT 4