ILX Lightwave LDX-3200 Series User Manual page 63

EXAMPLES "LAS:DIS:LDV?" -response: 0, means that the laser voltage measurement is not displayed.
"LAS: DIS:LDV?" -response: 1, means that the laser voltage measurement is displayed.
n Front Panel
n Remote
The LASer:DISplay:MDI command sets the display to show the monitor photodiode current measurement.
SYNTAX DIAGRAM
PARAMETERS None.
POINTS OF
INTEREST The MDI measurement display is turned off automatically when another display selection is
enabled.
EXAMPLES "LAS:DIS:MDI" -action: enables the display for photodiode current measurement values.
Laser:Disp:Mdi" -action: enables the display for photodiode current measurement values.
o Front Panel
n Remote
The LASer:DISplay:MDI? query returns the status of the MDI measurement display mode.
SYNTAX DIAGRAM
:
LAS
-where the response is 0 or 1.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:
:
LAS
:
DIS
PAGE 18
LASer:DISplay:MDI
IPD
:
DIS
MDI
LASer:DISplay:MDI?
MDI
:
IPD
?
CHPT 4