Tilt-Foot Adjustment; Operating The Ldx-3200 Precision Current Source - ILX Lightwave LDX-3200 Series User Manual

Tilt-Foot Adjustment

The LDX-3200 Series Precision Current Source comes standard with folding front legs and two rear feet for use as a
bench top instrument. Extending the front feet so that the instrument front panel sits up makes it easier to view the
LED displays. To use them, place the unit on a stable base and rotate the front legs downward until they lock into
position.

Operating the LDX-3200 Precision Current Source

Now that the LDX-3200 Precision Current Source is installed and ready for use, you can begin to learn about its
operation. The following figures are photographic copies showing the functional keypad groupings, back panel
connectors, and so on. Use these figures to familiarize yourself with the LDX-3200. After that, use Chapter 2 for
fundamentals of operating your instrument.
Power
Switch
Parameter
Selection
INTRODUCTION TO THE LDX-3200 SERIES
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Display
Laser Mode
Selection
FIGURE 1.1 LDX 3200 Series Front View
PAGE 4
Modulation Input
Adjust Section
Connector
Current
Range Selection
CHPT 1