ILX Lightwave LDX-3200 Series User Manual page 77

n Front Panel
n Remote
The LASer:LIMit:I1? query returns the value of the LASER current limit for the 100 mA range on the
LDX-3210. (Not applicable for LDX-3220).
SYNTAX DIAGRAM
:
-where the response is the current limit for the 100 mA range (LDX-3210).
POINTS OF
INTEREST The current limit is in effect in all modes of operation (ILBW, IHBW, or P). The current limit in
use depends on the LASER output range selection.
EXAMPLES "LAS:LIM:I1?" -response: 40, means the laser current limit is 40 mA.
"Laser:LIM:I1?" -response: 50, means the laser current limit is 50 mA.
n Front Panel
n Remote
The LASer:LIMit:I2 command sets the LASER current limit value for the 200 mA range on the LDX-3220. (Not
applicable for LDX-3210).
SYNTAX DIAGRAM
:
PARAMETERS An <nrf value> which represents the LASER limit current, in mA.
POINTS OF
INTEREST The current limit is in effect in all modes of operation (ILBW, IHBW, or P). The current limit in
use depends on the LASER output range selection.
EXAMPLES "LAS:LIM:I2 180" -action: the LASER current limit is set to 180 mA.
":Laser:Limit:I2 160" -action: the LASER current limit is set to 160 mA.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:
LAS LIM
:
LIM
LAS
PAGE 32
LASer:LIMit:I1?
:
I1
LASer:LIMit:I2
<white
:
I2
space>
?
<nrf
value>
CHPT 4