ILX Lightwave LDX-3200 Series User Manual page 64

POINTS OF
INTEREST In local operation, the status of the MDI measurement mode is indicated by the enunciator next
to the display (µA will be illuminated and not blinking when the display is in MDI measurement
mode).
EXAMPLES "LAS:DIS:MDI?" -response: 0, means that the laser photodiode monitor current measurement
is not displayed.
"Las:dis:MDI?" -response: 1, means that the monitor PD current measurement is displayed.
n Front Panel
n Remote
The LASer:DISplay:MDP command sets the display to show the monitor photodiode power measurement.
SYNTAX DIAGRAM
PARAMETERS None.
POINTS OF
INTEREST The MDP measurement display is turned off automatically when another display selection is
enabled.
EXAMPLES "Las:Display:MDp" -action: enables the display for photodiode power measurement values.
"Laser:Disp:MDP" -action: enables the display for photodiode power measurement values.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:
:
LAS
PAGE 19
LASer:DISplay:MDP
PPD
:
DIS
MDP
CHPT 4