ILX Lightwave LDX-3200 Series User Manual page 48

NAME PARAMETERS
LAS:SET:MDP? NONE
LAS:STEP 1
LAS:STEP? NONE
LAS:TOL 2
LAS:TOL? NONE
MES 1
MES? NONE
RAD 1
RAD? NONE
SECURE 1
TERM 1
TERM? NONE
TIME? NONE
TIMER? NONE
Table 4.1 LDX-3200 Series Device-Dependent Commands (Cont.)
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
LDX-3200 SERIES DEVICE-DEPENDENT COMMANDS
FUNCTION
Returns the constant P (optical power) set point
Used to set the LASER set point step value.
Returns the LASER set point step value.
Used to set the LASER set point tolerance value and time period value.
Used to return the LASER set point tolerance value and time period
value.
Used to enter a string message of up to 16 bits.
Returns a previously stored ASCII message.
Sets the radix type for numerical data. Decimal, binary, octal, or
hexadecimal.
Used to return the radix type for numerical data.
Used to gain access to protected data.
Used to add a carriage return to the device terminator.
Returns the status of the TERM command.
Returns the elapsed time since the instrument was last powered up.
Returns the elapsed time since the timer was last reset.
PAGE 3
CHPT 4