ILX Lightwave LDX-3200 Series User Manual page 66

EXAMPLES "Laser:Display:Param" -action: selects a parameter and displays its value.
"LAS:DIS:PARAM" -action: selects a parameter and displays its value.
n Front Panel
n Remote
The LASer:DISplay:SET command sets the display to show the set point of the selected display mode.
SYNTAX DIAGRAM
PARAMETERS None.
POINTS OF
INTEREST Using this command has the same effect as physically holding the (DISPLAY) SELECT switch
down continuously.
EXAMPLES "Las:Dis:Set" -action: enables the display for the set point of the selected mode: LDI, MDI (I
or MDP (P
"LAS:Dis:Set" -action: enables the display for the set point of the selected display mode.
o Front Panel
n Remote
The LASer:DISplay:SET? query returns the status of the set point display mode.
SYNTAX DIAGRAM
:
-where the response is 0 or 1.
POINTS OF
INTEREST The set point display will not time out when REMOTE operation is used. (It will be
continuously displayed.)
EXAMPLES "LAS:DISPLAY:SET?" -response: 0, means the set point is not shown on the display.
"Las:Dis:Set?" -response: 1, means the set point value is shown on the display.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:
:
LAS
)
PD
:
LAS
PAGE 21
LASer:DISplay:SET
:
DIS
SET
LASer:DISplay:SET?
:
DIS
SET
)
PD
?
CHPT 4