ILX Lightwave LDX-3200 Series User Manual page 57

POINTS OF
INTEREST After this command is issued, the LDX-3200 Series Precision Current Source will automatically
enter the LASER photodiode current calibration mode. When the LDX-3200 Series Precision
Current Source is ready, the user should enter the true measured value. This procedure is
outlined in Chapter 6.
If the LASER output is not ON, or if the P mode is not selected, error code E516 will be
generated.
In remote operation, the LASer:CAL:MDI? query may be used to determine if the LDX-3200
Series Precision Current Source is ready for the user to enter a value via the LASer:MDI
command.
EXAMPLES "Las:CAL:MDI" -action: the LDX-3200 Series Precision Current Source enters the LASER
photodiode current calibration mode.
"LAS:Cal:MDI" -action: the LDX-3200 Series Precision Current Source enters the LASER
photodiode current calibration mode.
n Front Panel
n Remote
The LASer:CAL:MDI? query is used to determine that the LDX-3200 Series Precision Current Source is ready
for a value to be entered during the calibration cycle of the LASer:CAL:MDI mode.
SYNTAX DIAGRAM
:
LAS
POINTS OF
INTEREST After this query is issued and a response of 1 is received, the LDX-3200 Series Precision
Current Source be ready for the user to enter a photodiode current value via the LASer:MDI
command (see Chapter 6).
EXAMPLES "LAS:CAL:MDI?" -response: 1, means the LDX-3200 Series Precision Current Source is ready
for the user to enter a photodiode current value via the LASer:MDI command.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
: :
CAL
PAGE 12
LASer:CAL:MDI?
MDI
?
IPD
CHPT 4