Signal Control And Signal Characteristics; Filter/Clipping Settings; Filter Settings - Rohde & Schwarz R&S SMW-K54 User Manual

®
R&S SMW-K54/-K86/-K142/-K147

5 Signal control and signal characteristics

This section lists settings provided for configuring the baseband filter, for defining the
signal generation start and for generating signals necessary for synchronization with
other instruments.
Settings:
● Filter/clipping
● Trigger
● Marker
● Clock
● Local and global connectors

5.1 Filter/clipping settings

Access:
► Select "IEEE 802.11 > General > Filter/Clipping Settings".
This dialog provides settings to configure the baseband filter and clipping.

5.1.1 Filter settings

Access:
► Select "Filter/Clipping Settings > Filter".
The dialog comprises the settings, necessary to configure the baseband filter.
User Manual 1175.6749.02 ─ 27
settings............................................................................................102
settings..................................................................................................... 106
settings...................................................................................................... 111
settings........................................................................................................ 115
Signal control and signal characteristics
settings.................................................................... 117
Filter/clipping settings
102