Canon imagePRESS C10000VPSeries Troubleshooting Manual page 138

A-7) Loosen the mounting screw [1] on the separation drive mount unit. Then, lift the separation drive mount unit [2] and have
the 19T gear push up the fixing 86T gear [3] (including the fixing roller, the insulating bush and the bearing). While in this state,
tighten the mounting screw [1] on the separation drive mount unit again and secure the unit.
[Reference] The 19T gear is located below the 86T gear.
A-8) Assemble the parts in the reverse order from the step A-4) to the step A-1).
[Service parts]
- Common service parts
No. Part Number
1 Old FU6-0336- 010
New FU6-0336- 020
2 Old XD2-1100-642
New
- imagePRESS C10000VP Series
No.
1 Old
New
FE3-7866-000
2 Old
New
FE3-7867-000
*1 Newly set up as service part.
- imagePRESS C6000/ C7000VP/ C6010 /C7010VP /C6011 /C7011VP Series
No.
1 Old
FC6-0315-000
New
2 Old
FC6-0312-000
GEAR, 86T
GEAR, 86T
RING,E
Part Number
*1
*1
Part Number
*2
*2
Description
Description
MOUNT, SEPARATION
DRIVE, 1
MOUNT, SEPARATION
DRIVE, 2
Description
MOUNT, SEPARATION
DRIVE, 1
MOUNT, SEPARATION
DRIVE, 2
133
Q'ty Fig.No.
1->0 814A
814B
0->1
854A
854B
1->1
Q'ty Fig.No.
816
0->1
816
0->1
Q'ty Fig.No.
1->1 816
1->1 816