Table of Contents
Advertisement
5) Remove the 6 screws [2].
[Reference] Marking the screw holes, with a permanent marker, which the trimming assembly was secured to may be helpful
when installing back the trimming assembly.
6) Hold the areas marked with red circles and remove the trimming assembly [1].
[Note] There is a protrusion [2] on the bottom side of the trimming assembly. As placing the removed trimming assembly directly
on the floor may damage the trimming assembly, use 4 reams of LTR size copy paper [3] and place the assembly on top of them.
7) Remove the 2 screws [2] and then remove the bracket [1].
233
- Quick Links:
- Error Code
Hide quick links:
Advertisement
Table of Contents
