Canon imagePRESS C10000VPSeries Troubleshooting Manual page 211

3) Refer to the service manual and remove the fixing web unit.
4) Remove all of the 13 connectors that are connected to the fixing inner driver PCB assembly [1] located in front side of the fixing
assembly.
5) Remove the harness from the harness guide [A] and the harness guide [B] at both sides of the PCB.
6) Remove the screw [1], and then remove the fixing inner driver PCB assembly.
7) Remove the blue connector that is connected to the harness of the heater located on the back of the fixing inner driver PCB
assembly.
206