Canon imagePRESS C10000VPSeries Troubleshooting Manual page 104

1) Refer to Service Manual "4. Parts Replacement and Cleaning > "Pickup / Feed System" > "Pulling Out the Delivery/Reverse
Unit" and pull out the Delivery/Reverse Unit".
2) Remove the 2 screws [1] and while lifting the lever [2], remove the delivery reverse cover 2 [3]. Remove the 3 screws [4] and
then remove the delivery reverse cover 1 [5] and the delivery upper guide cover [6].
3) Remove the tension spring [2] located at the top of the back-up roller [1].
4) Remove the screw [1] and the connector support plate [2] located in the rear side of the delivery/reverse unit. Then, remove
the connector [3] in the back of the connector support plate.
99