Canon imagePRESS C10000VPSeries Troubleshooting Manual page 5

Error Code........................................................................................................ 173
Measure against power supply errors _ the harness routing list classified according to power
supply systems of 12V/24V/38V.................................................................................................. 173
E025-0x51 due to the continuous paper passing of entire solid image whose size is A3 or larger... 177
Remedy When E260-0Fxx (Power Supply Error in Multiple Locations) Occurs..............................178
E029-0x01 by the incorrect position of Shutter Solenoid or error of shutter slide lever.................. 183
E842-0051/0052 due to shift in position of the Secondary Fixing Delivery Lower Separation
Claws........................................................................................................................................... 194
Precautions against an erroneous assemblage of the external heat unit........................................196
Points to note when installing, removing and cleaning the primary corona assembly.................... 198
Countermeasure against E060-0x01 or white line image................................................................202
E842-011x or the refresh roller does not work due to broken pieces of 16T/31T gear going
into the fixing pressure belt assembly..........................................................................................205
E023-0x00/E025-0x51/a white band due to damaged ball bearings in the developing drive rail
assembly......................................................................................................................................214
E018-010x/E029-4001 due to overload to the sliding part of the leading edge registration
patch sensor shutter.................................................................................................................... 217
E077-0001 caused by incomplete locking of the registration feed assembly..................................222
Information of proactive measure against E842-0x21.....................................................................223
E568-8002/Shaved gear tooth due to overloading with friction from sliding while the
estrangement rack is moving (Staple-Q1/W1/Booklet-Q1/W1/Saddle-AM2/AN2/Finisher-
AM1/AN1).................................................................................................................................... 224
E012-1080 due to the instable rotation of ITB drive (iPC8000VP).................................................. 228
Points to note in replacing the fixing external heat belt or external heating assembly.................... 229
Notice of periodical replacement of the trimming blade and the heater (Glue vat unit)...................230
Measure against failure after system version upgrade (Multi Function Professional Puncher_A1).. 231
E5A3-808x/E5B5-8016 and 1FA9 jam code due to sliding failure of dust buffer (Perfect Binder-
A1/B1/C1/D1/E1)......................................................................................................................... 232
Specifications-Related.....................................................................................237
Announcement about checking the color sensor service label value on installation of the device.. 237
Notice of procedure to replace the transmission shaft inside the drum drive assembly..................239
Countermeasure against shaving on the shaft of the upper registration roller................................247
Points to note when attaching the pressure roller heater in the secondary fixing assembly........... 248
Notification about the changes in the upper cover and cover sheet for the 1st fixing assembly
and second fixing assembly and about their proper uses............................................................253
Points to note when attaching the inner cover 2 on the secondary transfer drive unit.................... 255
Controller Specification...................................................................................257
After installing Fiery Color Profile Suite, spectrometers cannot be detected. ( Print Server )......... 257
Synchronization fails when changing Paper size of existing paper catalog media. ( Print Server ).. 258
Cannot staple for multiple worksheets in Excel ( Print Server )...................................................... 259
Unexpected result of booklet job with External Finisher. ( imagePRESS Server B5100/B4100 )...260
iii