Table of Contents
Advertisement
[Caution] When attaching the drum shaft, rotate the side face of the drum flange [1] counterclockwise by hand, and align the
groove [2] of the drum shaft with the groove [3] of the drum flange. (Be sure to rotate the drum counterclockwise in order to prevent
the scoop-up sheet from flipping.)
9) Remove 2 wire saddles [1], 1 (one) connector [2] and 1 (one) screw [3] to free the harness [4].
10) While holding the harness [1], hold the handle [2] to pull out the process unit [3] for approx. 10 cm.
187
- Quick Links:
- Error Code
Hide quick links:
Advertisement
Table of Contents
