Canon imagePRESS C10000VPSeries Troubleshooting Manual page 205

When the leaf spring is deformed severely as shown in the photo [C], the leaf spring of the shutter and the etching grid plate
interfere causing the shutter sheet or the shutter to get stuck to the etching grid plate and get torn [a] or damaged [b]. If the torn
section gets stuck, E060-0x01 may occur. The photo [D] is a normal state without the deformed leaf spring of the shutter.
- Measure for when the leaf spring of the shutter is deformed.
When the leaf spring of the shutter is deformed, fix the leaf spring. If the leaf spring is deformed or damaged severely causing it
to get stuck to the etching grid plate, replace with a new shutter unit (FM1-A485-000)[1].
[Service parts]
FM1-A485-000 shutter unit
E) When opening and closing the shutter manually 1
When opening and closing the shutter manually by holding and sliding the slider [1] by hand, the shutter and the leaf spring [2]
gets stuck to the etching grid plate [3] if the slider [1] is pulled strongly in the direction of the arrow [a] and it may damage the
shutter sheet or the shutter. When opening and closing the shutter manually, be sure not to pull the slider too strongly in the
direction of the arrow [a].
200