[Reference] The left photo is the image of the insulator of the pressure roller heater on the front side positioned over the heater
retainer (Front) [1]. The pressure roller is being removed for easier viewing. The right photo shows the correct state.
5) Hold the AC cable at the rear side [A] and front side [B] of the pressure roller heater. Move the pressure roller heater and set
the AC cable on the front side in the notch [a] of the heater retainer (Front).
6) Push the pressure roller heater from the rear side toward the front side and set the insulator on the front side in the notch of
the heater retainer (Front). Push the pressure roller heater until the stepped section of the insulator is pressed against the heater
retainer (Front).
250