Canon imagePRESS C10000VPSeries Troubleshooting Manual page 121

Check the securing state of both ends of the halogen heater of each product. The procedure begins with the work upon
replacement of the halogen heater or upon installation of the unit having the halogen heater.
If the insulator of the halogen heater is detached, go to the step D) Checking damage of the halogen heater cables and replacing
the halogen heater (All the models in common).
[Reference] All the photos of the procedures below show the correct securing state.
- imagePRESS C10000 Series
The structures of the primary fixing assembly and the secondary fixing assembly are different.
Perform the steps A) and B) for the primary fixing assembly, and perform the steps A), B) and C) for the secondary fixing assembly.
A) Checking the halogen heater of the external heat belt
A-1) Check that the heater mounting plate on the rear side and the insulator of the halogen heater end are correctly attached.
A-2) Check that the heater mounting spring on the front side and the insulator of the halogen heater end are correctly attached.
B) Checking the halogen heater of the fixing roller
B-1) Check that the heater mounting plate on the front side and the insulator of the halogen heater end are correctly attached.
B-2) Check that the heater mounting spring on the rear side and the insulator of the halogen heater end are correctly attached.
116