Canon imagePRESS C10000VPSeries Troubleshooting Manual page 157

5) Install the parts in the reverse order from the step 4).
[CAUTION] Mind the following points when attaching the separation claws to the separation claw adjust plate of the paper delivery
assembly with screws.
a) Check if the embosses [a] are securely fit into the holes on the separation claw adjust plate and also if the separation claw
adjust plate is not coming on top of the embosses.
b) If the embosses of the separation claw are fit improperly and the screws are fixed, the separation claw adjust plate is bent and
attached askew as seen in the photo [b]. The line [a] indicates the proper position. Check the right position before fixing it with a
screw.
152