Canon imagePRESS C10000VPSeries Troubleshooting Manual page 62

• For uneven density with Bk, replacing the 192T gears (FL3-0561-010) connected to the Y/M/C/Bk drum drive assemblies is
recommended.
2) Refer to "Replacing the Main Station Rear Covers" in the service manual and remove the rear covers.
3) Remove the 2 screws [1] and the flywheel [2].
4) Loosen the 2 screws [2] fixed to the shaft, remove the screw [3] and then the flywheel mount [1].
5) Replace the 192T gear [1] with a brand-new one.
6) Repeat the works from the step 3) to 5) to the 192T gears to be replaced.
7) Reassemble the parts in reverse order from the step 4).
[Service parts]
No.
1 Old FL3-0561-010
New
Part Number
GEAR, 192T
Description
57
Q'ty Fig.No.
4->4 108