Canon imagePRESS C10000VPSeries Troubleshooting Manual page 225

10) Wipe the entire circumference of the cam of the 60T gear [a] with lint-free paper with alcohol and then apply the Hanarl grease
on the entire circumference of the cam [a].
11) Secure the 60T gear to the edge registration detect assembly with the new E-ring (XD2-1100-502).
[Note]
• Do not touch the surface with finger where the Hanarl grease is applied.
• Make sure that the Hanarl grease is not dripping. If it is, wipe it off.
12) Wipe the surface [a] of the shutter stay, removed in the step 8), that engages with the cam with lint-free paper with alcohol.
On imagePRESS C6000/ C6000VP/ C7000VP/ C10000 Series, replace with the new type shutter stay (FC9-6076-000).
[Reference] Do not apply any Hanarl grease on the surface of the shutter stay that engages with the cam. Wipe only.
13) In the reverse order from the step 8), attach the shutter stay to the edge registration detect assembly.
[Reference] Make sure that the shutter mounting spring is inserted in the cutout of the shutter stay [a]. If the shutter mounting
spring is not properly inserted in the cutout, the leading edge registration patch sensor shutter cannot be attached.
14) Assemble the parts in the reverse order from the step 7) to the step 1).
[Service parts]
(imagePRESS C7000VPE/ C7010VP/ C7011VP/ C7010VPS/ C7011VPS)
220