Fuji Electric FCX-AII-V5 series Instructions Manual And Service Instructions page 78

Menu 6 : RANGE
7: DAMPING
0.3SEC
< INC > < CHANGE >
INC
To menu 8 : OUTPUT MODE
76
CHNG
7-1: DAMP CHANGE
0.3SEC
< ENT > < CL >
CL after
1
setting
CL
ENT
7-1: DAMP CHANGE
1.2SEC
CHNG OK? < ENT/CL >
ENT
7-2: DAMP WRITE
1.2SEC
Menu 7 : Damping Adjustment
the vibration of the installation site is important,
it is required to set appropriate damping time to
• Input time constant value under display
ing can be changed.
• Press <ENT
2
• Press <CL
Selectable time constant value :
3
Note 1) In the case of FCX-AII series transmit-
ters with safety function, when there are
4
no damping, then 0.12 sec is appeared
on HHC.
Note 2) The above damping constants are used
only for the electronics unit. The detecting
unit has its own constants independent
of the electronics unit (for details, refer
to the data sheet).
, dam-
to to come back to
.
TN5FCXA2V5h-E