A3. Parameter Setting Prior To Delivery - Fuji Electric FCX-AII-V5 series Instructions Manual And Service Instructions

A3
PARAMETER SETTING PRIOR TO DELEVERY
The damping value (time constant), function of zero/span adjust screw, output current mode,
indicator scale, cut point, mode below cut point and burnout, have been set prior to delivery as
shown in the following.
Each parameter is changed by using HHC or the 3 push button of the LCD display.
N°
1
2
3
4
(square root extraction mode setting)
5
6
7
9 Protective function of set value
"7: Polygonal line correction," which can be changed only by the HHC.
Note 2) In both the differential pressure transmitter (Type: FKC) and remote seal type (Type: FKD), the output
current mode is set in linear unless it is designated.
106
Item
Damping value
(time constant)
External adjustment function
of the transmitter
Current output mode
Digital indicator scale
(9th digit of code symbol)
Cut point
Mode below cut point
(square root setting)
Burnout
Polygonal line correction
(write protect)
contents of parameter
0,06sec
Adjustable (ENABLE)
Linear (Could be set in factory
when ordering (note 2))
Could be set in factory
when ordering
7.07%
Linear
Hold (note 3)
Not corrected (INVALID)
Canceled (OFF)
TN5FCXA2V5h-E