Fuji Electric FCX-AII-V5 series Instructions Manual And Service Instructions page 52

①
crease. Since the transmitter uses oil as internal pressure transmitting medium, if acceleration is caused by
vibration, internal pressure is generated in accordance with the acceleration value, thus resulting in the output
Oscillation frequency: 10 to 150 Hz
Within ±0.25% of URL/(9.8m/s
2) Damping
setting appropriate damping time constant. The following table shows the effect of damping on the vibration of
Damping set value [sec]
1.2
4.8
19.2
10Hz, that is, the lowest frequency.
50
M
②
③
M
M
④
2
)
Damping of output oscillation
1/3 or lower
1/5 or lower
1/10 or lower
Menu 7 : Damping
vibration of the installation site is important, it is re-
quired to set appropriate damping time to avoid the
• Press the key on the screen
screen for changing the damping time constant ( ).
• Input the damping time constant with the
keys on the screen . Press the
the value and press the
Settable range: 0.06 to 32.0 sec
• Select whether the damping time constant setting is
saved on the screen
Press the key to save the damping time constant
setting.
Press the or key to cancel the setting
Remarks
to display the
and
key to decrease
key to increase the value.
.
TN5FCXA2V5h-E
-