Operating Procedure - Fuji Electric FCX-AII-V5 series Instructions Manual And Service Instructions

6.2.3 Operating procedure

①
44
M
M
M
Menu 1 : TAG N° (1-TAG)
To set the TAG No. of the transmitter, use the proce-
dures shown in the following diagram. TAG NO. can
be inputted up to 26 character of alphanumeric codes.
• Press the key on the screen
No. setting (
②
• Input alphanumeric characters as required with the
and keys on the screen
Functions of the keys:
key: To input characters at the cursor position
(0 to 9, space, A to Z, –)
key: To move the cursor position to the next
③
(1 2
Note)
Characters other than numerical characters, capi-
tal letters of the alphabet, space, and "–" are dis-
played as "*."
Initial six characters are displayed. (The cursor
④
position is displayed by a vertical bar.)
To display the seventh and following characters,
scroll the characters to the left. (The cursor posi-
tion (far right) is displayed as a number.)
The cursor position is 1 in the example
The cursor position is 8 in the example
ber 8 is input as the eighth character.)
If HART is selected, the initial eight characters are
treated as TAG information.
• Select whether the TAG No. on the screen
Press the key to save the TAG No. setting.
Press the or
* Description of the displays on the first line on the
item name selection screen (
: Differential pressure transmitter
: Pressure (gauge pressure) transmitter
: Absolute pressure transmitter
to display the TAG
).
.
3 ... 26 1)
key to cancel the setting.
)
TN5FCXA2V5h-E
. (Num-
. (Num-
.