A2. Calibration - Fuji Electric FCX-AII-V5 series Instructions Manual And Service Instructions

A2
CALIBRATION
Preparation for calibration
The transmitter should be calibrated in a calibration room.
For calibration of each transmitter, the following devices are required.
• Pressure generator (should have as high an accuracy as possible 0,05% mini)
* Measurable ranges are listed in the table below.
• Power supply : DC power supply (24 V DC) or Fuji Electric FC series power supply unit
• Measuring device: Digital voltmeter (capable of measuring transmitter output with an accu-
racy better than 0.1%)
• Hand Held Communicator (HHC) type FXW
Measurable range
Differential pressure range
FKC model...kPa (mbar)
0,1~1 (1~10)
0,1~6 (1~60)
0,32~32 (3,2~320)
1,3~130 (13~1300)
5~500 (50~5000)
30~3000 (300~30000)
500~20000 (5000~200000)
Differential pressure range
with remote seals
FKD...F model kPa (mbar)
0,32~32 (3,2~320)
1,3~130 (13~1300)
5~500 (50~5000)
30~3000 (300~30000)
200~20000 (2000~200000)
Level pressure range
FKE...F model kPa (mbar)
0,1~6 (1~60)
0,32~32 (3,2~320)
1,3~130 (13~1300)
5~500 (50~5000)
30~3000 (300~30000)
Pressure range with direct
mounting
FKP...F model kPa (mbar)
8,125~130 (81,25~1300)
31,25~500 (312,5~5000)
187,5~3000 (1875~30000)
625~10000 (6250~100000)
104
Pressure range
FKG model...kPa (bar)
1,3~130 (0,013~1,3)
5~500 (0,05~5)
30~3000 (0,3~30)
100~10000 (1~100)
500~50000 (5~500)
Pressure range
with remote seal
FKB...F model kPa (bar)
1,3~130 (0,013~1,3)
5~500 (0,05~5)
30~3000 (0,3~30)
100~10000 (1~100)
500~50000 (5~500)
Pressure range with direct
mounting
FKH model kPa (mbar)
8,125~130 (81,25~1300)
31,25~500 (312,5~5000)
187,5~3000 (1875~30000)
Absolute range
FKA model...kPa abs.(bar abs.)
1,6~16 (0,016~0,16)
1,6~130 (0,016~1,3)
5~500 (0,05~5)
30~3000 (0,3~30)
100~10000 (1~100)
Absolute pressure range
with remote seal
FKM...F model kPa abs (bar abs)
1,6~16 (0,016~0,16)
1,3~130 (0,013~1,3)
5~500 (0,05~5)
30~3000 (0,3~30)
100~10000 (1~100)
TN5FCXA2V5h-E