Replacement of the digital indicator
(1) Unscrew the electronics housing cover
on indicator side.
(3) Remove the connector pin connecting
unit. However, if you replace only the
digital indicator, you need not remove
the connector pin.
(4) Connect a new digital indicator following
the reverse order of disassembly procedure.
Before tightening, make sure a small recess on the
surface is positioned at the top as shown below.
(6) Assemble the electronics housing cover.
100
Digital indicator
plugin port
Pin plug
Digital indicator
Transmitter cover
Amplifer
TN5FCXA2V5h-E