Fuji Electric FCX-AII-V5 series Instructions Manual And Service Instructions page 62

①
60
M
M
M
M
Menu G : Setting of LCD display
The LCD display is independant of the transmitter set-
ting. So the LDC display must be set.
In this menu, it is possible to change the range (0%-
100%), the unit and the value type displayed.
②
G-1 LDV : LCD setting for the 0% (4mA)
• Press the
screen for setting the indicated value corresponding
to 0% ( ).
• Input the indicated value corresponding to 0% of the
③
actual scale on the screen
Functions of the keys:
key: To decrease the value
key: To increase the value
• To set the decimal point position, press the
the screen
④
name ( ) and you can set the decimal point position
with the and
key: To move the decimal point position to left
key: To move the decimal point position to right
• Select whether the indicated value setting of 0% is
saved on the screen
Press the key to save the indicated value setting.
Press the or
key on the screen
with the
. "P" is displayed at the right of the unit
keys.
.
key to cancel the setting.
TN5FCXA2V5h-E
to display the
and keys.
key on