Fuji Electric FCX-AII-V5 series Instructions Manual And Service Instructions page 55

①
(Cancel the setting)
③
M M
(Save the setting)
④
(Cancel the setting)
(Save the setting)
See the next page for the procedure when UNdER is
selected.
TN5FCXA2V5h-E
M
M
M
M
M
Menu 9 : Burnout direction
Used for selecting output at occurrence of a fault in
the detecting unit.
9-1 bURNoT : Change of burnout
②
• For NAMUR specification, press the
screen
②
burnout (
• Select NotUse, OVER or UNDER on the screen (2)
with the or
• Select whether the burnout setting is saved on the
screen .
Press the
② Press the
9-2 OVER : Change of burnout current when OVER
(OVERSCALE)
This display appears if you select "OVER" for the
burnout.
• Press the
screen for changing the burnout current for OVER-
⑤
SCALE ( ).
• You can change the burnout current with the
keys on the screen
Settable range:
For NAMUR specification, 21.6, 21.8, 22.0, 22.2,
22.4, 22.5 can be selected
⑥
Note)
You can change the saturation current value
tion of saturation current."
• Select whether the burnout current setting is saved
on the screen
⑦
Press the
for OVERSCALE.
Press the
to display the screen for changing the
).
key and press the
key to save the burnout setting.
or key to cancel the setting.
key on the screen
.
.
key to save the burnout current setting
or key to cancel the setting.
key on the
key.
to display the
and
-
53