dummyhead
dummyhead
FUEL SYSTEM
HO2S REMOVAL/INSTALLATION
(Except XT, XCT, XXT, XXCT types)
REMOVAL
Remove the power tilt relay case (page 10-8).
Remove the HO2S [1] from the left exhaust manifold
using a commercially available tool (ANM14) [2].
INSTALLATION
Install the HO2S [1] to the left exhaust manifold and
tighten it using a commercially available tool (ANM14)
[2] to the specified torque.
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf·ft)
Install the power tilt relay case (page 10-8).
5-52
[2]
[1]
[2]
[1]