TOHATSU 200 Series Service Manual page 120

dummyhead dummyhead
ENGINE COVER/COVER LOCK
Remove the under cover cap [1] and special bolt [2].
Remove the eight special bolts [3] from the R. engine
under cover [4] and remove it halfway.
Disconnect the water check tube [5] from the water
check grommet [6].
Remove the following parts from the R. engine under
cover:
– Under case grommet C [7]
– Hole plug [8]
– Water check grommet
– Water joint cap nut [9]
– Water joint cap [10]
Installation is in the reverse order of removal.
• Apply locking agent (Loctite
equivalent) to the seating surface of the water joint
cap nut.
TORQUE:
Water joint cap nut:
1.1 N·m (0.11 kgf·m, 0.8 lbf·ft)
6-4
® PRISM 403 or
[1]
[2]
[9]
[6]
[10]
[3]
[4]
[5]
[7]
[8]