TOHATSU 200 Series Service Manual page 12

dummyhead dummyhead
GENERAL INFORMATION
FRAME
Model
Type
Transom height (*1)
Tilting angle (*1)
Tilting stage
Trim angle (*1)
Swivel angle
*1: Transom angle is at 12°.
Model
Type
Transom height (*1)
Tilting angle (*1)
Tilting stage
Trim angle (*1)
Swivel angle
*1: Transom angle is at 12°.
Model
Type
Transom height (*1)
Tilting angle (*1)
Tilting stage
Trim angle (*1)
Swivel angle
*1: Transom angle is at 12°.
NOISE AND VIBRATION
Model
Control system
Sound Pressure Level At
Operator's Ear (2006/42/EC,
ICOMIA 39–94)
Uncertainty
Vibration (2006/42/EC, ICOMIA
38–94)
Reference to: ICOMIA Standard: as it specifies the engine operating conditions and measurement conditions.
1-4
XD/XT/XU
635 mm (25.0 in)
LU
508 mm (20.0 in)
LU/LD
508 mm (20.0 in)
BF175AK3
78 dB (A)
Not Exceed 2.5 (m/s
BF175AK3
XXD/XXT
762 mm (30.0 in)
68°
Stageless
– 4° to 16°
30° right and left
BF200AK3
XU/XCU/XT/
XCT/XD/XCD
635 mm (25.0 in)
68°
Stageless
– 4° to 16°
30° right and left
BF225AK3
XU/XCU/XT/
XCT/XD/XCD
635 mm (25.0 in)
68°
Stageless
– 4° to 16°
30° right and left
BF200AK3
Remote control
79 dB (A)
1 dB (A)
2
) rms
XXU/XXT/XXD
762 mm (30.0 in)
XXU/XXCU/XXT/
XXCT/XXD/XXCD
762 mm (30.0 in)
BF225AK3