TOHATSU 200 Series Service Manual page 23

dummyhead dummyhead
Align the stay with the center of grommet.
Cruising direction
90°
STAY
HARNESS BAND CLIP
POWER TILT SWITCH
3P CONNECTOR
POWER TILT SWITCH WIRE
Install the power tilt switch wire from the outside
of the ECM bracket and check that the wire do
not interfere with the ECM bracket.
GROMMET
HARNESS BAND CLIP
ECM BRACKET
SERVICE INFORMATION
CKP SENSOR 2P CONNECTOR
VTEC SOLENOID VALVE
1P CONNECTOR
(BF225 only)
VTEC SOLENOID VALVE
1P CONNECTOR
(BF225 only)
2-9