TOHATSU 200 Series Service Manual page 43

dummyhead dummyhead
Item
Emergency stop
switch
Engine oil leak
Each operation
part
Engine condition
(5)
Power trim/tilt
Shift control cable
*1: Cylinder sleeve water jacket
*2: Exhaust manifold
*3: Cylinder block
1. Lubricate more frequently when used in salt water.
2. For professional commercial use, log hours of operation to determine proper maintenance intervals.
3. When operating in salt water, turbid or muddy water, the engine should be flushed with clean water after each use.
4. Upon starting, check for unusual engine sounds and cooling water flowing freely from the check hole.
5. When there is 1/3 or more consumption, please exchange.
6. The user who performs shift operation frequently will recommend you exchange of a shift cable around three years.
7. Check the fuel line for leaks, cracks, or damage. If it is leaking, cracked, or damaged, take it to your servicing dealer for
replacement before using your outboard.
8. Check the fuel line for leaks, cracks, or damage. Replace the fuel line if there are signs of leaks, cracks, or damage.
operating hour interval, whichever comes first.
Each After
use use
Check
Check
Check
Check
Check
Check-
adjust
REGULAR SERVICE PERIOD (2)
Perform at every indicated month or
Every
First Every
6
mont
mont
h or
hs or
20
100
hrs.
hrs.
(6)
MAINTENANCE
Every Every
2 6
year
years years
or
or or
200
400 1,200
hrs.
hrs. hrs.
Refer
to
page
3-34*
–
–
–
3-34*
20-11*
3-3