Table of Contents
Advertisement
Cleaning and Disinfection
Cleaning
Cleaning Exterior Surfaces
Remove dirt residues and depositions thoroughly using a solution of lukewarm water and
commercial detergent.
Wipe the surfaces clean using a clean cloth and clear water.
Then, wipe the surfaces dry using a clean cloth.
Wipe / Spray Disinfection
The manual wipe and spray disinfection is a three-stage process:
• predisinfection,
• cleaning,
• final disinfection.
Thermo Scientific
Some incubator components are made of plastics. Solvents may
attack plastics. Strong acids or alkaline solutions may cause
embrittlement of plastics.
Do not spray cleaning agent onto the control panel and the
interfaces at the rear of the incubator. When wiping the incubator
clean, always make sure that no moisture enters into these
components.
Wipe the display window down with a slightly dampened cloth,
then wipe dry with a rag made of 100% microfiber.
Incompatible cleaners
Moisture-sensitive components
9
Heratherm
9-1
Hide quick links:
Advertisement
Table of Contents
