Thermo Scientific Heratherm IMH 60 Operating Instructions Manual page 80

Handling and Control
Decontamination
Table 7-18 Launching Decontamination
2010-03-31
Decontamination
Table 7-19 Stopping Decontamination Prematurely
2010-03-31 1:34
Quit Decon?
7-18 Heratherm
When decontamination is completed, the message
4:13
PM
Decontamination finished! appears in the multifunctional
finished!
display pane. Press the
that message.
The Decontamination icon in the menu bar will go out.
The settings that were in place before the
decontamination routine was started - for example, fan
speed, will be restored.
Press
select the Decontamination icon and press
confirm.
In the selection screen that appears, press
PM
switch to Yes and confirm the selection with
No Yes
The display returns to its default mode.
The Decontamination icon in the menu bar will go out.
The settings that were in place before the
decontamination routine was started - for example, fan
speed, will be restored.
button to acknowledge
to activate the menu bar, then use to
to
to
.
Thermo Scientific