Settings; Error Log - Thermo Scientific Heratherm IMH 60 Operating Instructions Manual

Handling and Control

Settings

Settings
The Settings menu item opens a submenu populated with various commands for viewing
general status information on the Heratherm unit and setting for the operation of the
incubator or its display window:
• Read access to error log
• Calibrating the incubator
• Setting date and time
• Toggling the temperature display unit between °C and °F
• Entering a configuration control code
Instructions for using these features are given in the following. Also supported is an option for
presetting the timer mode of operation, as explained previously in the section
page 7-8.

Error Log

Users calling customer service for support may be asked by the Thermo Fisher Scientific agent
to supply information from the error log of the incubator.This internal memory may be
accessed by choosing the Settings -> Error menu item. It enables the user to browse through
the most recent 22 alarm messages that were caused by hardware or control loop errors. Each
error is displayed with the date and time of its occurrence, a brief clear text description and an
internal error code.
Error codes and instructions for clearing alarm conditions appear in the section
on page
Table 7-24 Reading the Error Log
2010-04-06
2010-04-06
2010-04-06
Fan Error (E009)
7-22 Heratherm
12-1.
Press
confirm.
Press
1:33
PM
Settings
submenu.
Error
The first entry of the error log is displayed, named
1:36
PM
"Error 0."
Error 0
1:31
PM
to activate the menu bar, then use
to select the Settings icon and press
to select the Error item from the Settings
"Timer" on
"Error Codes"
or
to
Thermo Scientific