Calibration - Thermo Scientific Heratherm IMH 60 Operating Instructions Manual

Table 7-24 Reading the Error Log
2010-04-06
2010-04-06
Heat Relay (E109)

Calibration

The Settings -> Calibration menu item enables the user to initiate a temperature calibration
process (see
sensors and choose whether calibration should be accomplished manually or automatically:
• The Manual option allows for entering an absolute temperature directly, as measured - for
example, using an external reference sensor.
Table 7-25 Entering the Calibration Reference Temperature Manually
2010-04-06
Thermo Scientific
Press
1:37
PM
Error 1
the previous one).
1:34
PM
After the entry numbered 21 the display wraps and
returns to the beginning of the error log, displaying
Error 0 again.
To exit from the error log and return to normal display
mode press
The Settings icon in the menu bar will go out.
"Temperature Calibration Procedure"
Maintain the ambient conditions within the specified limits of the
incubator before launching calibration.
Varying ambient conditions may impact the result of the
calibration routine, which may lead to misadjustment of the
controller and unreliable temperature control operation.
Prepare for temperature calibration (see
perature Calibration"
cedure"
Press
confirm.
The Error menu item from the Settings submenu
1:33
PM
appears in the multifunctional display pane.
Settings
Error
to go to the next entry (or
twice.
on page
Calibration Prerequisites
and
on page 10-3).
to activate the menu bar, then use
to select the Settings icon and press
Handling and Control
to go back to
10-4) for the built-in temperature
"Preparing Tem-
"Comparison Measurement Pro-
Heratherm
Settings
or
to
7-23