Predisinfection - Thermo Scientific Heratherm IMH 60 Operating Instructions Manual

Predisinfection

1. Remove all samples from the work space and store them in a safe place.
2. Spray disinfectant onto the surfaces of the work space and of the accessories or wipe the surfaces
clean using disinfectant.
3. Allow time for the disinfectant to act as specified by the manufacturer.
Thermo Scientific
The glass panel may only be removed by properly trained and
authorized specialists.
The glass panel must be held by two persons.
Spray the sensor and other hard-to-reach components with
disinfectant!
Cleaning and Disinfection
Wipe / Spray Disinfection
Risk of injury caused by breaking of
glass panel
Disinfecting hard-to-reach components
Heratherm 9-3