Cleaning and disinfection
Empty the condensation tray
Empty the condensation tray from underneath the device. To do so, pull the condensation tray
completely out of the device (see
Cleaning exterior surfaces
Remove dirt residues and depositions thoroughly using a solution of lukewarm water and commercial
detergent.
Wipe the surfaces clean using a clean cloth and clear water.
Then, wipe the surfaces dry using a clean cloth.
Vacuum the fan guard on the back with a household vacuum cleaner.
Wipe / spray disinfection
The manual wipe and spray disinfection is a three-stage process:
• predisinfection,
• cleaning,
• final disinfection.
Thermo Scientific
Fig.
4-3), when the door is open.
Contact with live electrical components may cause a lethal electric
shock.
Disconnect the device from the mains before carrying out cleaning
and disinfection work!
• Switch the device off with button
• Remove the plug from the socket and secure it against
reconnection.
• Check whether the device is voltage-free.
Electrical shock
.
Heratherm IMC 18
9
9-1