Thermo Scientific Heratherm IMH 60 Operating Instructions Manual page 65

Table 7-2 Display Features
Feature
2010-03-29 12:59
Timer
On
29.03.2010
heating relay
error
(E109)
Thermo Scientific
Item Function
D1 Display field showing a permanent readout of the actual temper-
ature in the work space either in ° C or °F (depending on the
user's preferences, see
page 7-27). At temperatures below 105° C or 221 ° F the temper-
ature readout has one digit after the decimal point, while temper-
atures beyond are shown without any decimal places.
Alternatively, a flashing time entry prompt of the general format
hh:mm
place while the user is setting the incubator's built-in clock.
D2 Four-line multifunctional display pane with fields for date and
PM
time, a display area for the specific options of the selected menu
Off
item, alarm codes, progress indicators for continuous processes
(for example, program-controlled temperature ramping), etc.
12:59
D3 Menu bar with iconized representations of adjustable parame-
ters. A red border is used to highlight the current menu item, as
selected using the
Right
given in
Note If a menu item cannot be selected, then the function it represents is not
part of the equipment configuration of your unit.
D4 Status display area with three icons representing specific sta-
tuses of the incubator (from left to right):
Door Open
- The
bator is open or has not been closed correctly (see
Switch"
Note The
- Upon occurrence of an error condition, the red alarm icon will
be illuminated. At the same time the current error code will flash
in the display field at D2. The alarm may be acknowledged by
pressing the
- The readiness indicator icon appears when the incubator has
been switched off using the
figure
D5
Settings pane labeled
or ° F (depending on the user's preferences; see
Display Unit"
221 °F the temperature readout has one digit after the decimal
point, while temperatures beyond are shown without any deci-
mal places.
"Temperature Display Unit"
(hours:minutes, both with two digits) appears in this
Menu
(K1) and arrow buttons
(K4). Brief descriptions of the individual menu items are
table 7-3 below.
icon appears when the front door of the incu-
on page 4-11).
Door Open
icon is only functional with IMH-S Series devices.
button.
7-1).
Set
for temperature set value in either °C
on page 7-27). At temperatures below 105 ° C or
Handling and Control
Left
On/Off
button (item K3 in
"Temperature
on
(K2) and
"Door
Heratherm 7-3