Tube Access Ports
Heratherm incubators may be equipped with additional tube access ports in the side and top
panels.
Available tube access port options are listed in
Tabelle 4-1 Tube Access Ports for Heratherm Incubators (Option)
Model
IMH and IMH-S
The tube access ports are mounted in fixed locations in the side and top panels (see
figure
4-14).
Figure 4-14 Tube Access Ports
[1]
Top panel mounted tube access port
[2]
Side panel mounted tube access port
[3]
Sealing cap for side panel mounted tube access port
Once the cables, tubes or other conduits have been inserted, the tube access ports must be
padded with the heat-resistant fiber pads shipped with the device and the cap must be
mounted to seal the port as far as possible.
Thermo Scientific
Side Panel Mounted Port,
dia. in mm/inch
24/0.95 or 58/2.28
1
2
The surface around the tube access ports may become extremely
hot.
table 4-1
below.
Top Panel Mounted Port,
dia. in mm/inch
24/0.95 or 58/2.28
Risk of Burning on Hot Surface
Product Description
Tube Access Ports
3
Heratherm
4-17