Thermo Scientific Heratherm IMH 60 Operating Instructions Manual page 83

Table 7-22 Turning on the Fan
Table 7-23 Adjusting Fan Speed or Turning the Fan Off (table-top incubators only)
Thermo Scientific
Press as often as needed to reach the second fan
speed level, then confirm with
The multifunctional display pane will show the current
fan speed level as a percentage (60% or 100%).
Additionally, the matching number of chevrons will be
illuminated in the bar graph to the right.
The display returns to its default mode.
The Fan icon in the menu bar is illuminated now to
indicate that the fan is running.
Press to activate the menu bar, then use
to select the Fan icon and press
The settings dialog shown at left appears in the
multifunctional display pane now, with the current fan
speed setting flashing already.
Change the fan speed with
to confirm.
The display returns to its default mode.
The fan continues to run until the unit is switched off.
Handling and Control
Floor stand incubators
.
or
to confirm.
or , then press
Heratherm 7-21