Replacing the Power Cord
If the power cord is damaged, it must be replaced by an original spare part. Using a standard
power cord with a lower thermal withstand capabilities is prohibited.
Returns for Repair
Prior to returning any materials, please contact our Customer Service Department for a
"Return Materials Authorization" number (RMA).
Material returned without an RMA number will be refused.
Thermo Scientific
The incubator may have been used for treating and processing
infectious substances, which may have caused contamination of the
incubator and its components.
Prior to return shipment, it is therefore mandatory that all incubator
components be properly decontaminated..
• Clean the incubator components thoroughly, then disinfect or
decontaminate them (depending on application).
• Fill in and attach a safety declaration with details on
decontamination activities performed to the items that are to be
repaired.
Replacing the Power Cord
Contamination hazard
Maintenance
Heratherm
10-5