Installation procedures
Installing the Perforated Shelves
Installing the Perforated Shelves
The illustration below shows the placement of the shelf system elements.
[1]
[2]
[3]
[4]
[5]
Figure 5-2 Installing the Shelving
Preparing the useable space
Upon delivery, Heratherm incubators are not in a sterile state. Before the initial start-up, the
incubator must be decontaminated.
The following work space components should be checked for cleanliness and disinfected prior
to use:
• Support rails,
• Shelf support,
• Perforated shelves,
• Useable space surfaces,
• Work space seals and gaskets,
• Glass door
5-2
Heratherm
Air Baffles
Retaining Springs (only for table-top incubators)
Support Rails
Shelf Support
Shelves
Thermo Scientific