Floor Stand Incubators - Thermo Scientific Heratherm IMH 60 Operating Instructions Manual

Handling and Control

Floor stand incubators

Table 7-21 Adjusting Fan Speed or Turning the Fan Off
31.03.2010
31.03.2010
31.03.2010
Floor stand incubators
The unit contains a regulated fan; fan speed can be lowered (adjusted) in 2 stages:
Minimum fan speed level (chevrons 1 through 3 illuminated)
Maximum fan speed level (chevrons 1 through 5 illuminated)
M
Table 7-22 Turning on the Fan
7-20 Heratherm
Press
The settings dialog shown at left appears in the
14:15
multifunctional display pane now, with the current fan
20%
speed setting flashing already.
Change the fan speed with
14:15
80%
14:15
To turn off the fan, use
0%
then press
The display returns to its default mode.
If you have just changed the fan speed level, the Fan
will remain illuminated in the menu bar.
If you choose to turn off the fan altogether, the Fan icon
in the menu bar will be extinguished.
Press
The settings dialog shown at left appears in the
multifunctional display pane now, with the value 0%
flashing already.
to activate the menu bar, then use
to select the Fan icon and press
to confirm.
to confirm.
to activate the menu bar, then use
to select the Fan icon and press
to confirm.
or , then press
to reset its speed to 0%,
to confirm.
Thermo Scientific
or
or