Thermo Scientific Heratherm IMH 60 Operating Instructions Manual page 74

Handling and Control
Timer
Table 7-12 Setting a Weekly Timer
2010-03-29 12:59
2010-03-29
On:
2010-03-29
Off:
2010-03-29 12:59
2010-03-29
On:
2010-03-29
Off:
2010-03-29 12:59
2010-03-29 12:59
7-12 Heratherm
Press
1:05
PM
PM
Monday
Off-Timer
should start flashing when selected (or continue to the
08:00
1:05
AM
PM
06:00
PM
desired weekday by pressing
turn-on time of that day to start flashing).
Press
minutes by pressing
Use
turn-off time by pressing
Set the turn-off time as explained above, then press
weekday.
To prevent the incubator from turning on and back off
on a specific day, set both hours and minutes to --:--.
Set the scheduled turn-on and turn-off times for each
1:05
PM
PM
single day of the week all the way to Sunday and press
Sunday
Off-Timer
--:--
1:05
AM
PM
--:--
PM
Sunday are disabled by default.)
If there is no need to set the turn-on and/or turn-off
times for a specific weekday, press
next day, respectively.
When prompted to save your changes, press
PM
Save ?
confirm.
No Yes
Note This prompt for saving also appears when you press the Esc
button while working on the weekly timer's settings.
To enable the weekly timer press
PM
Timer
Alternatively, press
On
option if the weekly timer you have just saved should be
activated at a later date.
In the menu bar, the Timer icon is illuminated and a
hand is rotating on the icon's face.
to select the turn-on time for Monday, which
or to set the hours, then continue to
or to set the minutes, then continue to the
to continue to Tuesday or any other desired
. (The turn-on and turn-off times for Saturday and
or to go back and forth to the previous and
, which will cause the
.
.
and
.
and to select the Off
to
Thermo Scientific