Temperature Set Value - Thermo Scientific Heratherm IMH 60 Operating Instructions Manual

Temperature Set Value

Heratherm incubators allow for setting the desired work space temperature directly using only
a few button presses. After confirming the new temperature set value in the settings pane Set
(item D5 in
the temperature display field (item D1 in
Table 7-4 Adjusting the Temperature Set Value
Thermo Scientific
figure 7-1 on page 7-1), the user may trace the resulting temperature change in
Press
select the Temperature icon and press
In the flashing settings pane Set, press
adjust a new temperature set value, then press
confirm your settings.
The display returns to its default mode.
The actual temperature measured in the work space
and shown in the temperature display area starts to
change until it reaches the newly adjusted set value.
figure 7-1 on page 7-1).
to activate the menu bar, then use
Handling and Control
Temperature Set Value
to
to confirm.
or to
to
Heratherm 7-7